Engage disconnect tool (Pack of 5)

In stock

The disconnect tool, available in a pack of 5, allows easy disconnection of the M and S Series Microinverters from the EngageTM cabling system.

*Note: *This product requires installation by a certified installer. At checkout, you can request matching to an installer in your area. 

For detailed installation instructions, kindly refer to the documentation tab below.

For bulk purchase kindly contact us at enphasestore@enphase.com.

Color Orange
Material PVC
Dimensions 3.3in x 1in x 2.5in
Compatability M and S Series microinverters and EngageTM cabling system
Connector Types MC-4 and Amphenol Helios4

To disconnect a Microinverter from the cable, the tool may be inserted using the two large prongs of the disconnect tool into the two holes of the drop connector. The connector will need to be rocked back and forth while pulling gently to disengage.

Philips 2 and 3 screwdrivers may be used instead of the disconnect tool.

M Series Microinverter system

S Series Microinverter system

EngageTM Cabling system


25.40 mm / 1 inch


63.50 mm / 2.5 inch


83.82 mm / 3.3 inch


0.35 lbs