Engage™ cable portrait

$31
In stock
SKU
ET10-240
 
Engage™ cable portrait is available to buy in increments of 1
Overview

The Engage™ Cable ET10-240-BULK is a continuous length of 12AWG cable with pre-installed connectors for Enphase M and S series Microinverters. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. It is rated for 240VAC and used for portrait PV modules.

*Note: *This product requires installation by a certified installer. At checkout, you can request matching to an installer in your area. 

For detailed installation instructions, kindly refer to the documentation tab below.

For bulk purchase kindly contact us at enphasestore@enphase.com.

Voltage 240 VAC
Connector 4 Connectors
Connector Spacing 39.4 in (1.0m)
PV Orientation Portrait
Temperature Rating 90°C Dry/Wet
Insulator Rating THWN-2
UV exposure rating  UL 746 C, F1
Compliance  IEC 60529 IP67, CAN/CSA 22.2 No. 21, 182.3, UL 486A/B, 514C, 6703, and 9703
Cable Rating TC-ER
Cable Diameter 0.49 in (1.25 cm)
Minimum bend radius 4.75 in (12 cm)
Compatability M-Series Microinverters
Color Black

M Series Microinverter system

S Series Microinverter system

EngageTM Cabling system

Connector Spacing

1025 mm / 40.3 inch

Number of Connectors

Minimum Order Quantity - 4

Weight

0.45 kg / 1.2 lbs per drop

Accepts cable diameter

10.8 mm to 12.0 mm

Conductor size

2.5 mm2