Engage™ cable landscape
The Engage™ Cable ET17-240-BULK is a continuous length 12AWG cable with pre-installed connectors for Enphase M and S Series microinverters. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. It is rated for 240VAC and used for landscape PV modules.
*Note: *This product requires installation by a certified installer. At checkout, you can request matching to an installer in your area.
For detailed installation instructions, kindly refer to the documentation tab below.
For bulk purchase kindly contact us at firstname.lastname@example.org.
|Connector Spacing||67in (1.7m)|
|Temperature Rating||90°C Dry/Wet|
|UV exposure rating||UL 746 C, F1|
|Compliance||IEC 60529 IP67, CAN/CSA 22.2 No. 21, 182.3, UL 486A/B, 514C, 6703, and 9703|
|Cable Diameter||0.49 in (1.25 cm)|
|Minimum bend radius||4.75 in (12 cm)|
|Compatability||M and S Series microinverters|
M Series Microinverter system
S Series Microinverter system
EngageTM Cabling system
1700 mm / 66.9 inch
Number of Connectors
Minimum Order Quantity - 4
0.45 kg / 1.2 lbs per drop