Q Cable (Portrait)

In stock
Q Cable (Portrait) is available to buy in increments of 1

The Q Cable™ is a continuous length 12AWG cable with pre-installed connectors for Enphase IQ SeriesTM microinverters. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. It is rated for 240VAC and used for Portrait PV modules of 60 cell.

*Note: *This product requires installation by a certified installer. At checkout, you can request matching to an installer in your area. 

For detailed installation instructions, kindly refer to the documentation tab below.

For bulk purchase kindly contact us at enphasestore@enphase.com.

Voltage rating 600V (connector rating 250 V)
Connector Spacing 51in (1.3m)
PV Orientation Portrait (60 or 72 cell)
Temperature Rating 90°C Dry/Wet
Conductor Rating THHN/THWN-2 dry/wet
Flame test rating FT4
Compliance RoHS, OIL RES I, CE, UV resistant, combined UL for the United States

IQ Series microinverters

Type of Q Cable 1.0m portrait module pitch (Connector pitch is 1.3m)
Color Black

IQ SeriesTM Microinverter system

Q CableTM system

Connector Spacing

1300 mm / 51.2 inch

Number of Connectors



1.2 lbs per drop